Here is water dispenser cleaning guide:
Materials required for cleaning include;
- Mild dish soap
- White vinegar
- Warm water
- Soft sponge or cloth
- Bottle brush or pipe cleaner
- Towels or paper towels
Here is the procedure for cleaning your dispenser:
Turn off and unplug your unit:
Before starting any cleaning, make sure to turn off the water dispenser and unplug it from the power source to prevent any accidents. This is always a good practice when dealing with any electronic device.
Dissemble the cold water access:
Turn the top cover wash and dry it. Dissemble all the components inside the tray. Clean the inside shiny tray is the most sensitive part of the dispenser, be careful not to use soap when clean the part because this may affect the taste of your water.
Empty and Rinse the Reservoir:
Empty the water reservoir of any remaining water by pouring it out completely. Rinse it thoroughly with warm water, using a gentle swirling motion to dislodge and remove any debris or residue clinging to the sides or bottom of the reservoir.
Clean the Exterior:
Wipe down the exterior of the water dispenser with a damp cloth or sponge and mild dish soap. Pay special attention to any areas with stains or spills. Rinse with clean water and dry thoroughly.
Clean the Dispensing Nozzle/taps:
Use a soft sponge or cloth dampened with warm, soapy water to clean the dispensing nozzle. If the nozzle is removable, take it off and soak it in a solution of equal parts white vinegar and water for about 15-20 minutes to help dissolve any mineral deposits. Use a bottle brush or pipe cleaner to clean inside the nozzle if necessary. Rinse the nozzle thoroughly with clean water and dry it before reattaching it.
Read: Best office water delivery in Nairobi
Sanitize the Reservoir:
Mix a solution of equal parts white vinegar and water and pour it into the water reservoir. Let it sit for about 30 minutes to sanitize the interior of the reservoir and help remove any buildup or odors. Afterward, thoroughly rinse the reservoir with clean water multiple times to remove any vinegar residue.
Once all parts are cleaned and dry, replace the drip tray (if applicable) and plug in the water dispenser.
Flush the System: After cleaning, run several cycles of water through the dispenser to flush out any remaining vinegar or soap residue. This ensures that your water dispenser is ready for use.
Additional Tips:
- Clean your water dispenser regularly, ideally every 1-3 months, depending on usage.
- Use distilled water instead of tap water to reduce mineral buildup.
- If your water dispenser has a filter, follow the manufacturer’s instructions for replacing or cleaning it regularly.
We do professional water dispenser Cleaning and check out on this link for top water dispenser repairs in Nairobi.
Other service we offer:
- Phone screen replacement and repair
- Computer repair
- Dispenser repair
- Cooker installation and repair
- Fridge repair
- Rental house management system