Welcome to NextFixRepairing Service.

How to repair a wooden office chair

Step by Step on how to repair a wooden office chair

  • Tools Needed:

Wood glue, clamps, wood filler, sandpaper,  touch-up marker, fine sandpaper, clear finish

    1. Dismantle the Chair:

Look for the  part and the sections where joints are loose and dismantle the chair from there.

2.Clean the Joints 

From the joints when you have removed the parts clean it very well to remove old glue and debris.

 3. Apply New Glue

After you have cleaned and allowed the parst to dry well . Get a  good quality wood glue and apply it  on the joint.

4. Clamp the Joint

When you have applied the glue hold the joint together with clamps for some times until the glue stick well. Most of the glue comes with written instruction on how long you should hold.”

Check: Best office upholstery services in Nairobi

5. Scratches and Dents

To remove the scratches and dents  clean the area  and wipe the scratched area to remove dust.

Use wood filler to fill scratches and dents  and give it time to dry.For minor scratches, a touch-up marker may suffice.

3. Wobbly Base

  • Tools Needed: Screwdriver, wood glue, or wood screws.
  • Steps:
    1. Check the Base: Inspect the base for loose screws or damage.
    2. Tighten Screws: If screws are loose, tighten them. If any are stripped, replace them.
    3. Use Wood Glue: If the base is damaged, you can reinforce it with wood glue and clamps as described earlier.

4. Squeaky Joints

  • Tools Needed: Lubricant (like WD-40 or silicone spray).
  • Steps:
    1. Identify the Source: Determine where the squeak is coming from.
    2. Apply Lubricant: Spray a small amount of lubricant on the joint and work it in.
    3. Wipe Off Excess: Make sure to clean any excess lubricant to avoid attracting dust.

5. Repainting or Refinishing

  • Tools Needed: Sandpaper, wood stain or paint, clear finish.
  • Steps:
    1. Sand the Surface: Remove the old finish with sandpaper.
    2. Clean the Dust: Wipe down the chair to remove any dust.
    3. Apply Stain/Paint: Use a brush or cloth to apply stain or paint evenly.
    4. Finish: After it dries, apply a clear finish for protection.

For the best office chair repair services in kenya call us today on 0706731791

Leave A Comment

Your email address will not be published. Required fields are marked *